25 dimensional signs in a hurry!

The MultiCam has been kept running plenty of hours as the fronts and backs (and middles too) of the hole markers and rules signs have been cut.  The files were very large with all of the woodgrain detail and were cut overnight while I slept.

While the rule signs were being cut I laminated the hole markers. Each had a piece of 3/4″ plywood laminated into the center to ad strength and also provide a secure attachment for the screws.
The next task is to laminate the fronts and backs of the rule signs. They too will have 3/4″ plywood glued into the center. 

The next task is to use the die grinder to add woodgrain detail to the edges. Even with 30 lb Precision Board this job goes quickly. And then it is off to paint. Stay tuned for that process.
-dan

Published with permission from precisionboard.blogspot.com. Source.