Routing magic

We used EnRoute to create more than 200 routing files to design components for our house when we built it. Those files were used to create thousands of components, both in the construction of the structure and the finishing inside and out. For the trim we used about a hundred sheets of 30 lb Precision Board (mostly 1″ material) and many more than that of MDF. The MultiCam router was used to create all of the round window trims, wainscotting crown mouldings, the bridge sides and the corner blocks on the windows and doors throughout the house. The CNC tools allowed us to incorporate details which would have been impossible to do by hand.

The house has now been in progress for almost four years, and now at long last we are down to the tiny details. We’ve been living in the house for more than two years and when that happens the finishing details seem to take even longer than they should. In the last months a little more work was done and we took delivery of the long awaited dining room furniture. This afternoon the light was perfect as the sun shone through the giant round window to the south and I captured a good shot of the finished dining room at last.

Published with permission from precisionboard.blogspot.com. Source.