Telling a story with paint

Yesterday I mounted the dynamo armature to the largest gear on the ‘MARVELOUS MACHINE’. I then designed and cut a bracket to mount the outer housing. I painted and aged the pieces prior to assembly. It was pure magic to watch it all turn.
It was looking pretty good but I wasn’t finished quite yet. I knew a few minutes with a brush would change things in a big way.

I first painted two coats of metallic gold on the raised areas of the name plate. When this as dry I added a little aging to tone it down. I then came back with a brighter metallic gold and added a little bling to the areas what would naturally wear with use.
I then  added a little rust to the base on the right side. This was dirtied up with some dark glaze. Then I brought out some dark metallic silver and dry brushed the edges of the rotor and also the top edges of the base. This was followed up with the teeniest amount of bright silver on the edges to add a little wear and bling to those areas. Once again I aged things back down a smidge before I called it done.
The piece instantly had a history and looked like it had been in service for many decades. It looked well used but cared for and maintained.

Published with permission from precisionboard.blogspot.com. Source.