A Sign Is The Welcome Mat For A Business

Having a nice sign at a restaurant is imperative – it is the welcome mat for passersby and one of the best representatives of the business.

Vic Holt, owner of Rev Art in Decatur, AL sent in some pictures of a sign he made for the “Back Alley Bistro“, a restaurant also located in Decatur. When the customer came to him wanting an old-fashioned looking sign but with a modern edge for their business, Vic knew he could create the sign desired using his CNC router coupled with Vectric Aspire CNC Software.

Screen Shot 2013-05-23 at 1.36.13 PM

Using Precision Board Plus PBLT-15, Vic used his CNC machine to carve the double-sided sign before priming it using FSC-88WB Primer/Filler. After the primer, Vic applied the initial paint coat, starting with the color which belonged in the deepest recesses of the sign. Using a combination of rollers, foam brushes and bristle brushes, Vic applied separate colors of Sherwin-Williams Exterior Latex/Acrylic, using a foam roller on the highest parts of the sign while taking care not to over-saturate the roller to avoid drips.

Screen Shot 2013-05-23 at 1.45.35 PM

After the paint is complete and the sign is installed, Vic makes an on-site visit to inspect for any imperfections that might require touch-ups which may be more easily visible in the sunlight. Giving his customers the best is not enough – his goal is to ensure his customers are permanently satisfied with his work.

Be sure to visit: http://www.rev-art.com for more info!

photo (2)

260199_166862153482358_1816593058_n