The Sign Invitational Retrospective ( Part 3 of 5 )

So what do you do when your the new kid on the block in a room full of the most creative sign makers in the world? Well, you sit and listen to all of them of course…

That is what I did at least. I have been watching and hearing about the contestants for months, so of course, I was going to pick their brains! Only I really didn’t have to ask or pry they openly started giving tons of advice, tips and tricks right out of the gate. That’s what makes this industry great. They were excited to share their knowledge and thought process and they enjoyed learning about my background as well.

So here is some wisdom bestowed upon me by the Sign Makers and sponsors of the Sign Invitational 2016.

One of the first I met was Roger Cox and Periandros Damoulis from House of Signs in Colorado. We stayed in the same hotel and had lunch together on set up day. I watched for hours as the two of them kept pulling out part after part after part for their sculpture. It took them over 6 hours to put that thing together and was very well worth it in my opinion. I sat next to Rodger at lunch and honestly he picked my brain more than anything. But I learned from Rodger it is okay being diverse. It’s okay to know a little about everything because honestly it is helpful. Rodger told me they had a girl similar at his shop and he thinks its absolutely fantastic at the amount of things she can do.IMG_0052

The next sign artist I met Phil Vanderkratts and Donna Shriver from Signs by Van. They first tormented me by shipping their sculpt with packing peanuts which ended up everywhere…. I have forgiven them for that. Anyways, those two pretty much put a piece of foam in my hands along with a chisel and started showing me how to carve woodgrain. Without hesitation they started right in showing me what to do. We also became Facebook friends quickly and they want me to send them progress shots of my carving. Donna also kept checking up on me since we were two of the few females in this sea of men and we both came from similar background doing graphic design and marketing and now find ourselves sign makers.
IMG_0062

Doug Haffner from Haffner’s Fantastic Creations was my next encounter…. He simply is very entertaining and pretty much a walking sitcom. The things that man says and does are pretty much hilarious. I found myself laughing so hard I couldn’t breath at times. I sat next to Doug at several meals talking Star Wars, Harry Potter, Game of Thrones , Face/Off and Jim Henson and pretty much learned from Doug it is okay to be yourself and to be comfortable with yourself. After all we only have one life so we might as well make it a fun one.IMG_9986

Kellie Miller of Coastal Enterprises was a sponsor and now a woman I can call a friend. She showed me the inner workings of trade shows and showed me around a bit. Kellie gave me some amazing advice since I am just starting out in this field and showed me sometimes dynamite comes in small packages. Her best advice was “Don’t let people walk all over you, they will be surprised at all you can do.”IMG_0099

Peter Sawatzky has a absolute amazing laugh that belongs to a cartoon character. After learning Peter wanted to be a teacher before his recent endeavors, showed me sometimes life doesn’t go how you planned it. He wanted to be a teacher it didn’t work out, it was not for him and now he’s creating works of art daily. Just shows life doesn’t go as planned but sometimes it can put you on the course to something greater.IMG_0050

Dan Sawatzky….. I have been watching and reading his blogs for a few years, back when I first started freelancing for Jim. It was really cool to meet him after following him for so long. Dan is a very down to earth guy and incredibly nice. He helped inspire and get many of the people in the Sign Invitational started in sign making with his workshops. Besides learning he is a cut-throat go-kart driver, Dan put in perspective to me what I really want to do in life. I want to be a artist, simply put and I get to do that everyday here at the shop.IMG_0057

So I learned a lot from all of these wonderful individuals and I hope to keep learning more from all of them.

-Aubrey

Published with permission from Synergy Sign & Graphics. Source.

The Sign Invitational Retrospective ( Part 1 of 5 )

If you would have told me in September 2015 that this crazy idea Dan Sawatzky and myself hashed out in Denver would turn into this amazing event, I would not have believed you.

This past week, the Synergy crew spent the week in Orlando setting up, organizing, and tearing down what was one of the most exciting things we have ever been involved in. Over the next few days, Aubrey Gealsha ( recent hire and illustrator extraordinaire ) and myself will be writing a series of articles here on the blog showcasing what went down in Orlando at The Sign Invitational 2016.

For Now, I leave you with the results of the competition and pics of those entries.

Multicam USA

Coastal Enterprises

Enroute

Signcraft Magazine

1st Place – Peter Poanessa, Keene Signworx
2nd Place – Roger Cox, House of Signs
3rd Place – Jim Dawson, Synergy Sign & Graphics
4th Place – Phil Vanderkraats, Signs By Van
5th Place – Peter Sawatzky, Imagination Corporation

Peter Poanessa of Keene Signworx with his winning entry
IMG_0080

Roger Cox and Periandros Damoulis from House of Signs with the 2nd Place finish
IMG_0052

Jason Bair, Aubrey Gealsha, and Myself standing with our 3rd place entry.IMG_0088

Phil Vanderkraats and Donna Shriver from Signs by Van took 4th place
IMG_0062

Peter Sawatzky from Imagination Corporation took 5th place with his Artistic Android
IMG_0050

-Jim

Published with permission from Synergy Sign & Graphics. Source.

The Sign Invitational. Update

So, here it is. Our concept rendering for our entry into The Sign Invitational

Sign_Invitational_Entry

We are extremely excited to get started on the fabrication. 5 weeks out. I hope we can get it all done.

-Jim

Published with permission from Synergy Sign & Graphics. Source.

A New Angle.

Here are some shots of our latest install. We would like to thank Amy for trusting us with creating their masterpiece. Metallic latex paints were used on all surfaces of this one.

The sign was fabricated using our Multicam CNC router to carve 30lb density Precision Board Plus. All programming was handled in Enroute Pro 5.

Stop by and see this one. The pictures do it no justice.

You can find Amy and the crew at :

1114 Bowers Ave NW, New Philadelphia, OH 44663
Phone:(330) 364-5759

IMG_0065small

IMG_0060small

-Jim

Published with permission from Synergy Sign & Graphics. Source.

At The Movies.

A while back, I remembered seeing a Han Solo in carbonite sculpture that caught my eye. It was made by a well known sign shop on the east coast and all I could think to myself was ” I could do that!”. Well, months went by, and I still never had the time to mess around with it. Then like usual, something popped up in the form of a prop we needed for the At The Movies series we put on at my church every summer. In the meetings, we ended up talking Star Wars and I knew it was my time to speak up.

Han in carbonite would be the perfect prop. So here it is.

I’ll be posting step by step pics of the process, so make sure you keep checking back. This is shaping up to be a fun one!!!!

Here is the 3D file we used for the carving. We used 18lb Precision Board and built the thickness via slices using Enroute Pro 5.1

Screenshot (34)

The entire sliced model was carved on our Multicam 3000 series router using 1/2″, 1/4″, and 1/8″ Ball End mill router bits.

IMG_6192

Here you can see the finished carved pieces. They are exceptionally smooth and accurate.
IMG_6195

Han is now awaiting his final mounting on the box that will be sculpted to look like the movie carbonite prop.

IMG_6198

Stay tuned for more progress pics!

-Jim

Published with permission from Synergy Sign & Graphics. Source.