Instant ancient vine (frame work)

Work continues on many fronts on the Fox & Hounds pub project. Today the outside entry received the final coats of base paint, leaving the glazes to be done tomorrow. In the ladies washroom the last of the welded rusty steel stall dividers was installed today. With the bulk of the welding done it was time to do one last task before that equipment goes home once more at long last. The primary task fo today was to weld up the framework for the thick vines. 
It is my bet that at least one person will lean on, swing or climb on the vine in the next years. That means it needs to be sturdy. REAL STURDY. Anchor points were drilled into the floor to anchor the base. I bent and positioned a single rod for each vine from the ground, then screwed in heavy lag bolts at key points ensuring the vines will grow for many years to come. The vines intertwine around the brick post and wander up to the beam above, then down towards the beer dispenser below. A video screen will be mounted to the end, positioned perfectly for reference of the bar tender to access.
The next step will be to wrap the welded armature with diamond lath and then using sculpting epoxy to form the weathered and twisted grape vine. Stay tuned for progress.
-dan

Published with permission from precisionboard.blogspot.com. Source.

Workshop name tags 4

Old car insignias have always intrigued me. For Rafael’s name plaque I decided to create one. The type style I chose is called air conditioner. 
The vectors were basic. The open contour was modified by simply bending the two sides. 
I used the bevel tool to create a relief. It is fairly shallow.
The letter outline was created as a zero height flat relief. This was then merged LOWEST with the first relief.
Then I created the background relief, applying a subtle texture to the inner, raised portion. The lettering was created as a separate relief, positioned vertically and then merged highest to complete the file. It was now ready for tool pathing and routing.
-dan

Published with permission from precisionboard.blogspot.com. Source.

Workshop name tags 3

Cory’s name plaque  was to be a diamond shape. The vertical and horizontal lines play off this shape and a comic font offsets the squareness of the diamond. It uses a bitmap from my TEXTURE MAGIC collection called checkerboard squiggles.
The border of the panel is a basic flat relief. Then I modified this relief by using the bevel tool, but I set the perimeters to limit to the height.
Then I imported the bitmap, enlarged and entered it on the panel. 
The letter outline was created as a separate relief, adjusted vertically and then merged highest to the plaque.
The lettering was the last element to be added. It is a bevel with a base height of 0.15″. As quick as that the file was ready for tool pathing.  
-dan

Published with permission from precisionboard.blogspot.com. Source.

Workshop name tags 2

The second name tag was a relatively simple one. Jeff’s name tag would feature his name on a log round.
I imported the long round with splits bitmap from my TEXTURE MAGIC collection. The relief was a simple circle with a dome shape. The bitmap was then applied.
The lettering outline is then made into a relief, and then modified into a dome shape with a similar sized circle vector using the same settings as he original background vector.
Stay tuned for some more name plaques coming up.
-dan

Published with permission from precisionboard.blogspot.com. Source.

Workshop name tags 1

With the next Sign Magic Workshop quickly approaching (September 30 – October 2) it is time to start in on the name tags we create for our guests. I started with a sketch, as always. I designed in a hurry, ideas flow better that way, and scribbled down my ideas, moving on to the next as soon as I had it nailed. The details would come later.
The vectors were quick and easy… nothing hard here.
The relief was a simple oval, modified with a raised oval.
To create the texture I perused my TEXTURE MAGIC collection and selected one I like…  spaghetti. I enlarged it enough to make sure the 1/8″ ball nose bit to fit in everywhere. This was then applied to the relief.
The lettering border was made into a relief which was then modified with the oval to shape it to the same dome shape as the background relief. This was then merged (highest to the relief.
Then I applied the lettering.
When I created the bowl for routing the relief I took notice of the cool effect that happened when I created a separate 3/4″ thick relief. I decided I loved it. The spaghetti faded out on the edges and looked a lot like spaghetti on a plate.So I created a new oval slightly larger than the original relief. I used the limit height command to chamfer the edges. 
 This was merged highest with the original relief, completing the file.
-dan

Published with permission from precisionboard.blogspot.com. Source.