Who do you call if you’re a discerning family-themed cruise line looking to build a state of the art water slide featuring a signature element from one of your most beloved and iconic characters? The answer is FormaShape 3D Architectural Design Solutions of British Columbia. The design called for a giant replica of the white-gloved hand from everyone’s favorite cartoon mouse supporting the main structure of the slide. Patrons had to immediately recognize the hand, so every detail of the larger-than-life appendage became important, right down to the fingers, 3 of them, and thumb…..good trivia question!
Finished Precision Board Plus plug showing bonded segments used to construct the machining block
Because of its strength, rigidity and ease of machining, FormaShape chose to machine the FRP tooling plug from Precision Board Plus (both PBLT-4 and PBLT-8). Once the CAD design was approved by the client, the toolpath was fed into their 5-axis CNC router to machine the segmented plugs that made up the hand. According to Sean Conneely, Custom Fabrication Manager at FormaShape, new systems were developed for both the segmented plug and moulding techniques used on this project. In addition, special fabrication techniques had to be developed for both the plug and moulded parts. The precise Open Moulded process used by FormaShape ensures that the final FRP panels that make up the finished hand are within +/- 1mm of the Precision Board Plus machined plug!
Precision OM process used to manufacture the FRP segments that make up the hand
Having designed, engineered and manufactured the entire slide, the job of installation naturally fell to FormaShape – Whitewater West Industries. Check out their websites at www.formashape.com and www.whitewaterwest.com for more examples of their work.
FormaShape attaching the slide flume to the supporting hand
Did you know Coastal Enterprises makes support fixtures?
Coastal Enterprises will fabricate a support fixture for any Precision Board Plus tool. This support tool can be used for tool transport, CNC machining, lay up of composite laminate, oven/autoclave curing, final inspection, and every other process procedure. Support structures are designed with all-direction casters, leveling jacks, and tool hold down attachments that can be tightened during machining, etc. and loosened during oven/autoclave cycling. The custom hold down attachment allows independent movement between the tooling block and the support fixture.
Call us at (800) 845-0745 for more information or send us drawing of your tool.