Creating a wood texture finish, cross-hatching for an extra dynamic dimension, or achieving the perfect stucco effect can be made easy with TSF-45. This tough yet flexible coating has been made specifically to create a variety of texture finishes on Precision Board, but can also be used on wood, concrete, steel, glass, and even galvanized metal.
The great thing about TSF-45 is that it adheres directly to Precision Board with no priming. This process speeds up production time – which saves over all time and money. Here is a step-by-step guide on the basics of using TSF-45 on Precision Board Plus.
- Open your can of TSF-45 and notice the viscosity of the product. It has a thick consistency and, once applied, will hold its shape and not slump.
- Be sure to apply an ample amount of TSF-45 onto your Precision Board surface. Apply enough for a wetout of the areas you will be covering and to ensure you have enough to create your desired texture.
- Once you’ve achieved a full wetout and have enough TSF-45 to create your texture, begin to mold, stipple, brush, comb, etc. the product.
- Once you have your texture designed, leave to dry over night. Use a shop fan blowing across the surface to help speed upt he drying time and to make sure the entire product is cured. You’ll know the product is dry when the thickest part that was applied is no longer soft.
Please call us if you have any questions. We work with our products a lot and our technical department will gladly assist you. To request a sample pint of TSF-45, click here!
Request a sample size and we’ll send you a pint!
For more information, check out our youtube videos, tips and features, and our Product Data Sheet.
**Be sure to stay tubed for the next blog on finishing the TSF-45 on Precision Board.