Work continues on our trade show booth for the International Association of Amusement Parks and Attractions EXPO in Orlando, Florida. As I posted previously we decided to rebuild our booth which we created last year. We first stripped down last year’s effort and cut off all of the structure we no longer needed.
Since this year’s space is to be twenty feet wide instead of only ten we added two five foot wings to the sides of the booth. These fold in and fasten for shipping. The entire structure is of welded steel and the paneling is 3/4″ thick fir plywood. It’s far heavier than most booths but also much more sturdy. Every element and showpiece will be bolted to the backdrop. Setting up is as easy and quick as unfastening the two sides and swinging them open.
Once the new structure was welded up we bolted on the plywood. The faux rivets were glued into place and then the texturing and painting began. As with all of our projects we laid on the base coats and then the glazes.
A stand will bolt to the middle of the floor with a showpiece on the top – our dimensional logo.
We routed all of the dimensional signage from 40 lb Precision Board to make sure it survives the tough use it will see during transport ad at the show. These pieces will be painted, with the letting sporting a brilliant 23K gold leaf finish. On each side of the structural wings are our 25th anniversary medallions. It’s hard to believe we have been active in the business that long! The rich copper structural components will be carefully aged with a green patina to add character.
Published with permission from precisionboard.blogspot.com. Source.